IMPORTANT NOTES: Read First
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
MULTI-SECTION INCLINED CRAWL TUBE
R5-1500-3I Thru 6I
Page 1 of 3
Rev B
(A) Use liquid thread lock (such as Loctite
®
) with all threaded hardware. Important: Liquid thread lock (prior to
curing) helps to eliminate the common problem of "thread seizure" in stainless steel hardware by serving as a
lubricant during assembly.
(B) Do not pour concrete until the equipment is completely assembled, leveled and plumbed. Concrete must be
allowed to cure completely before using the equipment (at least 72 hours).
(C) Refer to Installation Manual for R5-1601 Panel-Type1 (Rotomolded) Assembly and 1708 Tube Support
Assembly.
(D) Use appropriate compliant protective surfacing and adjust footing depths accordingly. See free publication -
The Handbook for Public Playground Safety, Publication #325 at www.CPSC.gov for the surfacing appropriate
for the fall height of the equipment or consult you surfacing supply representative.
(E) Note: The upper panel is typically raised 3" above the deck.
Gap between Panel
1708 Tube Support Assembly
See Installation Manual Sections
and deck must be
(See Note E)
less than 3½"
Multi-Section Inclined Crawl Tube
Assembly for
FIGURE 1
mount assembly.
Deck
Tube orientation will vary,
appropriate Tube orientations.
see Top View of structure for
Figure 1.1
Note
R5-1601 Panel-Type 1 (Rotomolded)
See Installation Manual Sections
Figure 1.2
:
See Installation Manual Sections
R5-1601 Panel-Type 1 (Rotomolded)
Assembly for Ground mount assembly.
