For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
MULTI-SECTION INCLINED CRAWL TUBE
Rev B
R5-1500-3I Thru 6I
Page 2 of 3
Figure 1.1
Figure 2
Figure 1.2
Support Orientation. Dig footing hole and attach Tube
Step 5
Section. Refer to the Top View of your structure for Tube
Installation Manual.
Support Assembly of the Installation Manual, Figure 1.2,
Support to Tube Section. (Refer to Section 1708 Tube
Panel - Type1 (Rotomolded) Assembly of the
(See Note D)
Attach Panels to posts/decks. Refer to R5-1601
under and around Inclined Crawl Tube.
Place appropriate compliant protective surfacing
Step 3
Note A and Note B)
Step 2
Fully tighten all fasteners according to the
"TIGHTENING TORQUE FOR HARDWARE"
section of the Installation Manual.
Step 6
(See Note A)
Attach Tube Sections as shown in figure 1.1. Refer to
your structure top view for appropriate orientation.
Step 4
Attach Tube Sections with Tube Support as shown in
figure 1.2.
Note: Tube Support required for every second Tube
Step 1
(Factory Assembled)
Attach Tube Section to Panel as shown in Figure 2.
(See Note A)
3/8" x 1" O.D. Washer
TUBE SUPPORT
Washer
Head Bolt
3/8" x 1-1/2" Button
Washer
3/8" x 1" O.D.
Washer
3/8" Lock Nut
CRAWL TUBE SECTION
CRAWL TUBE SECTION
3/8" Lock Nut
INCLINED
3/8" x 1" O.D.
3/8" x 1" O.D. Washer
3/8" x 1-1/4" Button Head Bolt
VERTICAL LEG
3/8" x 1" Button Head Bolt
3/8" x 1" O.D.
KEE CLAMP
Head Bolt
Washer
Washer
3/8" x 1-1/4" Button
3/8" x 1" O.D.
3/8" Lock Nut
ROTO PANEL ROUND
3/8" x 1" O.D.
Molded-In Threaded Insert
