For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
SPIRAL STEP CLIMBER
INSTALLATION INSTRUCTIONS
Rev H
7/2/2013
R3.5-1234
Page 2 of 4
19"
482mm
Footing Detail
Step 1
Refer to Footing Layout and mark footing hole location.
Dig (1) Ø 12" footing hole. Refer to Footing Detail for
depth and details.
IMPORTANT: For areas with soft soil conditions, larger
footings may be required. Additionally, half foot deck
heights will require 6" deeper footing holes.
* Footing depth must be adjusted to compensate for the
depth/thickness requirements of selected safety
surfacing. See Section 06.1 of the Installation Manual.
Top View - Footing Layout
LOOSE FILL SURFACING MATERIAL SHOWN:
9" compressed or 12" uncompressed depth.
Compressed depth shown. (See Note C)
Optional Filter Fabric Over
Pea Gravel (for drainage)
Concrete Footing
Footing Anchor
Blocking, See
Installers Manual
2b Stone, drain rock
Undisturbed Soil
(Top of Soil)
(Finish Grade)
18"
457mm
27"
*
686mm
12"
305mm
