Manufactured by Krauss Craft, Inc.
www.playcraftsystems.com
For Customer Service Call
800.333.8519 (U.S.A.) or
541.955.9199 (International)
SPIRAL STEP CLIMBER
INSTALLATION INSTRUCTIONS
Rev H
7/2/2013
R3.5-1234
Page 4 of 4
Parts List
Specifications
Periodically tighten all screws, bolts and nuts. A
periodic inspection of all parts is necessary. If a part
is broken or worn, replace immediately. For general
maintenance please refer to our Playground
Maintenance Manual.
Maintenance
Assembled Parts List
36" DECK HEIGHT
Part #
DESCRIPTION
QTY
EE-4420
Spiral Step Climber Tread
3
FS-1234-3R35
Spiral Step Climber 36" R3.5
1
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
9
9333042
Washer Flat 3/8" x 7/8" O.D.
18
9413162-BLK
Nut Lock 3/8" w/ Black Cap
9
48" DECK HEIGHT
Part #
DESCRIPTION
QTY
EE-4420
Spiral Step Climber Tread
4
FS-1234-4R35
Spiral Step Climber 48" R3.5
1
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
12
9333042
Washer Flat 3/8" x 7/8" O.D.
24
9413162-BLK
Nut Lock 3/8" w/ Black Cap
12
60" DECK HEIGHT
Part #
DESCRIPTION
QTY
EE-4420
Spiral Step Climber Tread
5
FS-1234-5R35
Spiral Step Climber 60" R3.5
1
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
15
9333042
Washer Flat 3/8" x 7/8" O.D.
30
9413162-BLK
Nut Lock 3/8" w/ Black Cap
15
72" DECK HEIGHT
Part #
DESCRIPTION
QTY
EE-4420
Spiral Step Climber Tread
6
FS-1234-6R35
Spiral Step Climber 72" R3.5
1
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
18
9333042
Washer Flat 3/8" x 7/8" O.D.
36
9413162-BLK
Nut Lock 3/8" w/ Black Cap
18
Part #
DESCRIPTION
QTY
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
2
9333002
Washer Flat 3/8" x 1" O.D. x .100" thick
4
9413002
Nut Lock 3/8"
2
84" DECK HEIGHT
Part #
DESCRIPTION
QTY.
EE-4420
Spiral Step Climber Tread
7
FS-1234-7R35
Spiral Step Climber 84" R3.5
1
9103062-TR
Bolt Button Head 3/8" x 1-1/4"
21
9333042
Washer Flat 3/8" x 7/8" O.D.
42
9413162-BLK
Nut Lock 3/8" w/ Black Cap
21
SPIRAL STEP CLIMBER R3.5:
Shall be fabricated using 1.900" O.D. 11 gauge
steel tubing with welded 1.315" O.D. 12 gauge
steel tubing handles, tread supports, and 1/4" thick
steel plates. The Spiral Step Climber shall have a
multi-stage baked-on powder coat finish.
SPIRAL STEP CLIMBER TREAD:
Shall be made from high density 3/4" sheet plastic
specially formulated for optimum UV stability and
color retention.
HARDWARE:
Shall be stainless steel, zinc/nickel plated or
galvanized as required to resist rust and corrosion.
