USB Stick Content Requirements
Get a USB stick (from inside the product).
Make sure that you meet the following requirements:
a. Only use MP3-files.
b. The name of the MP3 file needs to have at least 5 characters.
c. The name of the MP3 file can’t contain any strange characters.
d. A single MP3 file can not be bigger than 2 MB.
5
Change the Content
1. Use the supplied hex key and unscrew the service-hatch bolts.
2. Remove the service hatch.
3. Remove the USB stick from inside the AudioBench.
4. Insert the USB stick into a computer and place the new
content / music on the USB stick. See the instruction on the right.
5. Insert the USB stick with the new content back into the
AudioBench.
6. Generate energy with the AudioBench. You should now be
able to hear your new content. If not, read the requirements on
the right again.
7. Make sure that you put the dust cover back over the
USB port.
8. Close the service hatch.
D
E
