2
Attach the vertical poles to each attachment
with the hardware that is inserted on the
attachments. The curved portion of the
pole is the top and it should face the inside
of the swing set frame.
NOTE:
The inside holes at the bottom of
the vertical poles should be larger diameter
than the outside holes. If not, the poles
need to be placed on the opposite sides.
Part Ref. #: PSHW21, PSHW36
3
Join the two footrest sections by twisting
them together until the Playsafe™ logo
aligns.
4
Insert the foot plate support bar through the
footrest.
5
Using an adjustable wrench, attach the
vertical poles to the foot plate support bar.
Repeat steps 5 and 6 for the other side of
the footrest.
Part Ref. #: PSHW4
6
Attach the four U-shaped hand rails to the
vertical poles.
NOTE:
The U-shaped hand rails should be
positioned on the outside of the vertical
poles.
Part Ref. # PSHW17
7
Rest the seat support bars on the U-shaped
hand rails.
12
©
2006 Pacific Cycle, Inc.
