Proper
Placement:
Slide Assembly
Correct Location
Incorrect
Location
Pre-Assembled Parts:
•
The screws and bolts for the slide rail/ladder legs are inserted on the slide. They will need to be removed prior to
inserting the legs into the slide.
•
The ladder steps should have screws and nuts installed. These will need to be removed prior to inserting the legs and
then reassembled with the head of the screw facing out.
14
©
2006 Pacific Cycle, Inc.
Step Illustration
Instructions
Hardware
Reference
1
Remove the screws, washers, and lock nuts from
the holes in the slide.
Part Ref. #: PSHW24
2
Insert the rail/ladder legs through the holes in the
top of the slide. Align the ladder holes with the
slide holes.
3
Insert the screws through the holes in the back of
the slide and secure them to the hand rails with the
screws and locking nuts provided.
Part Ref. #: PSHW24
4
Locate the slide front leg and insert it into the front
outside hand rail tube, on the underside of the
slide. Place a screw in that hole and secure it with
the lock nut.
NOTE:
For stability, this leg should be placed on
the outside of the slide, opposite the swing set
frame.
Part Ref. #: PSHW24
5
Insert the screw into the remaining hole on the
slide and secure the hand rail to the slide with the
lock nut.
Part Ref. #: PSHW24
