5
STEP 3
:
Adding Accessory
Brackets
At the desired location, install the
Accessory Brackets 24" apart as
shown.
Remove 1" bolts where needed for
Accessory Brackets.
Position Accessory Brackets top and
bottom as shown. Secure with
³⁄₈
" x
1" carriage bolt,
³⁄₈
" washers and
³⁄₈
"
lock nuts.
Note: Brackets should be
straight and flush with the side of
the trim.
Attach the ladder brackets to the
frame as shown.
Items for
STEP 4
:
(2) Ladder Brackets
(4)
³⁄₈
" x 1" Stainless Steel Hex Bolts
(supplied with the Accessory Bracket)
(4)
³⁄₈
" Flat Washers
INSTALLATION ON A PREMIUM DOCK
Additional Items Required for
STEP 3
:
INSTALL ACCESSORY BRACKETS
IMPORTANT
: Accessory Brackets (PS 1348) come with
³⁄₈
" x 1" GALVANIZED carriage bolts for mounting the
brackets to the dock frame and
³⁄₈
" x 1" STAINLESS STEEL hex bolts for mounting the ladder brackets
to the accessory brackets.
DO NOT use the galvanized hex bolts supplied with the dock frame kit to attach the ladder brackets or other
accessories. Although they look similar to stainless steel, the galvanized hex bolt will damage the
accessory brackets.
Position the ladder brackets facing
each other as shown. Secure with
³⁄₈
" x 1" STAINLESS STEEL hex bolts
provided with Accessory Brackets
and
³⁄₈
" flat washers provided with the
Dock Ladder.
24"
(2) PS 1348 Accessory Brackets (Purchase Separately)
