12
GB/IE
After replacing the wheels:
After the first few minutes of riding,
make sure that the screws are still
tight and that nothing has detached or
become loose.
Tension the wheel once more to make
sure that it is running quietly.
Cleaning and storage
We recommend that you clean and dry the item
thoroughly after use.
Remove small stones or other objects that may
have got caught on the wheels. Always store the
item in a dry place.
Information on disposal
Dispose of the item and its packaging materials
in accordance with current local regulations.
Packaging materials like e.g. foil bags must be
kept away from children.
Store the packaging materials out of reach of
children.
Dispose of the products and the
packaging in an environmentally friendly
manner.
The recycling code is used to identify
various materials for recycling.
The code consists of the recycling symbol
– which is meant to represent the recycling cycle
– and a number which identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty.
With regard to complaints, please contact the
following service hotline or contact us by e-mail.
Our service employees will advise as to the
subsequent procedure as quickly as possible.
Disassembly
Disassembling the handlebars
Press the pin (2a, 3a) on the back of the base
and pull out the handlebar (Fig. B).
To remove the handlebar from the seat, press the
pin (3a) and pull the handlebar out.
Disassembling the seat (Fig. C)
Loosen the screws and remove the threaded
sleeves. Take off the seat.
Use
Riding
Depending on the assembly variation, either sit
on the seat and give momentum by regularly
pushing off with both legs, or, if using without the
seat, put one leg on the deck and give momen-
tum by regularly pushing off with the other leg.
The item is steered by shifting your weight.
Braking
For the assembly variation with a seat, apply the
brakes by setting both feet on the ground. When
using without the seat, you can brake by press-
ing one foot on the rear wheel friction brake.
Maintenance
Replacing the front wheels
You can replace the front wheels.
Important!
Pay attention to the technical specifica-
tions. Wheels with a different diameter,
may alter the riding properties and
possibly endanger the user.
Do not use wheels that cannot be in-
stalled properly.
Never use wheels that are larger than
the original wheels on the item.
Wheels wear out. This wear depends on many
factors, such as, for example, the terrain, the size
and weight of the user, the weather conditions,
the material of the wheels and their hardness,
etc. Therefore, it is necessary to replace them
now and then.
1. Using a suitable Allen key, loosen the screws
of the two front wheels and remove them.
2. Install the new wheels and secure them with
the screws.
