3
Carefully remove all pieces from carton and
make sure that you have all parts listed (refer
to parts list on page 2).
If you are missing parts, please call GHP
customer service at 1-877-447-4768.
1.
Set base cabinet (H) upright on smooth, flat
surface. Insert 4 dowels (CC) into predrilled
holes in top of base cabinet (H). Slip left upper
side panel (B) over dowels until snug. Insert
2 bolts (AA) through washers (BB) and into
predrilled holes in left upper side panel (B) and
base cabinet (H). Tighten with screwdriver.
Repeat using right upper side panel (C).
2.
Insert 4 dowels (CC) into predrilled holes in
top edge of assembled side panels. Slip top
panel (A) over dowels (CC) until snug. Insert
bolts (AA) through washers (BB) and into pre-
drilled holes in top edge of side panels and top
panel (A).
3. Attach left cabinet door (E) by sliding hinges
into corresponding hinge receivers on left side
of assembled mantel. Tighten set screws with
screwdriver. Attach handle (DD) to left cabinet
door (E) with screw (EE) as illustrated.
Repeat using right cabinet door (F).
ASSEMBLY INSTRUCTIONS
1
2
B
H
A
F
C
AA
BB
CC
E
EE
DD
CC
BB
AA
3
