9
ASSEMBLY INSTRUCTIONS
Hardware Used
Hardware Used
AA
M6x10mm Bolt
x 2
6
D
AA
5
I
AA
M6x10mm Bolt
x 2
F
AA
4
E13
4. Attach Heat Shield Extender (F) by inserting
two M6 x 10mm bolts (AA) through the holes on
the Heat Shield Extender (F) and into the
pre-installed nuts on the back of the Main Heat
Shield (E13). Tighten with a screwdriver.
WARNING: The Heat Shield Extender (F) must
be installed before use to provide proper heat
protection.
5. Turn the unit back to its normal standing
position. Align the L shaped holes on the Door
Panel (I) with the stepped bolts (BB) on the
legs (G) and slide the Door Panel (I) into place
as illustrated.
6. Attach the 2 Cooking Grid Supports (D) to
the firebowl by inserting 2 M6x10mm Bolts (AA)
through the holes in the Cooking Grid Supports
(D) and into the pre-installed nuts in the Firebowl.
Tighten securely with a screwdriver.