20
LP FILL VALVE & LP BLEEDER VALVE
The bleeder valve allows pressure to vacate the LP tank when
80% full. The fill valve, is covered by the yellow end cap.
Only fill the LP tank to 80% capacity, liquid will appear from
the breather valve at 80%.
BBQ QUICK CONNECT
The BBQ quick connect is directly connected to the RV LP
system. It is equipped with it’s own shut-off valve (black
handle). The quick connect is a regulated (low pressure)
LP line that is supplied from the onboard LP tank. The BBQ
quick connect works with the standard, full-flow male quick
connect fitting. You will need a BBQ that is set-up for a low
pressure LP source.
BASIC OPERATION:
1.
Ensure the black valve is in the OFF position.
2. Remove the yellow cap and ensure the opening is clean.
3. Pull the sleeve of quick connect back and insert the
male quick connect fitting.
4. Push the male fitting until the sleeve snaps forward,
locking the fitting into the socket.
5. Connect your BBQ.
6. Turn the black valve ON to allow propane to flow to the
connected BBQ.
7.
Ensure the main LP switch in the Utility Center is ON.
NOTE:
Propane will only flow from the BBQ quick connect
when there is a hose connected. This is a safety feature
of this component. The black valve must be in the OFF
position to release the hose from the quick connect.
WARNING
: DO NOT FILL LP CONTAINER TO MORE
THAN 80% CAPACITY. Overfilling the LP gas container
can result in uncontrolled gas flow, which can cause a
fire or explosion. A properly filled container will contain
approximately 80% of its volume of LP gas.
*LP hose and BBQ not included.
