50
12 VOLT OR DC OPERATION
1. Turn the inverter ON. Ensure the TV and Blu-ray player
are plugged into the wall outlet located above the Blu-ray
player in the cabinet.
2. Turn the antenna booster on by pressing the black button
on the antenna booster. Press the search button.
3. Turn the TV on and select DTV-TV using the input button
on your TV or remote.
4. Using the menu button select - TV > Channels > Scan
Channel. This will bring in all local air channels.
5. For Cable TV connect a cable extension cord from the
cable hookup in the component compartment to
the park cable outlet. Turn the TV antenna booster off.
Follow step (4) for auto programing.
6. For Blu-ray operation turn on the Blu-ray player.
Using the source button on the TV or TV remote, select
HDMI 1. Insert a DVD or Blu-ray disc and allow the disc to
load and press play.
FOR 120 VOLT OR A/C OPERATION
When using generator or shore power switch the inverter
OFF. Use the same programing procedures as the
12 volt operation.
NOTE:
To save power while watching TV ensure the Blu-ray
player is switched OFF. Only turn your Blu-ray player on
when in use.
