8
ASSEMBLY AND USE INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
For a correct use of bouncer we recommend you to take few minutes to read this manual.
QUALITY GUARANTIES
- Our bouncer is made according to European safety standards EN 12790 : 2009.
- This product is guaranteed for a period as stated by the laws in force.
- All defects and/or deteriorations caused by wrong use, by the non respect of security
standards, assembling and use here mentioned or by modifications made on the product,
cannot be claimed.
- The natural consumption and damage caused by incorrect or wrong use are not disputed.
- Scratches, wear, dullness or the turning yellow of the parts due to rubbing, to the use of
detergents, sweat or weather phenomena are not a manufacturing defect.
- Wrong washes, wet and not well dried fabrics may create molds and cannot be
considered as manufacturing defects.
IMPORTANT!
:
BEFORE USING THIS ARTICLE,
READ CAREFULLY
THE INSTRUCTIONS AND THE
SEQUENCE OF ASSEMBLY TO AVOID UNNECESSARY HAZARDS TO YOUR CHILD!
THROW AWAY AND REMOVE ALL POLY BAGS OF PACKING, THEY MIGHT BE RISKS
OF SUFFOCATION FOR YOUR BABY!
NEVER LEAVE YOUR CHILD UNATTENDED!
OPENING:
After remove and thrown away the packing, open bouncer turning pipes outside; fix pipe
pushing springs (Fig. 1) and push well until them come out (Fig. 2).
To adjust back-rest, pull-up its levels (Fig. 3) on both sides; adjust to required height. To
adjust seat, pull-up its levels (Fig. 4) on both sides. Reached the desired position, push
levers and lock them, check that the back-rest and seat are properly fixed. We suggest to
make these regulation operations WITHOUT baby inside products. Anyhow, always firmly
hold back-rest or seat to avoid any dangerous accident to the baby.
Now your bouncer is ready for use.
Always make sure it's well open, strongly assembled and stable, that there are not broken,
defected or missing parts.
WARNINGS:
ALWAYS use safety belts and crotch strap, properly adjusted and fixed!
:
