Now the seat is assembled. Make sure that all components are securely and correctly
assembled and the structure is stable.
To fix the seat to the frame, insert the two support side frames inside the holes placed on
both sides (Fig. 15) until the complete release of the spring "CLICK".
Your swing is now completely assembled and ready for use (Fig. 16).
REGOLATIONS:
Our swing is provided with seat belts and crotch-pad, always use them and well regulated.
8- After you have let your baby sit inside the seat, put both buckles in central locking (Fig.
17). To regulate side belts, pull them (Fig. 18) to make them well adhere to your baby.
Make same operation on both sides. The adjustment of the shoulder belts is placed on
the back of the seat.
9- To loosen belts (Fig. 19), press and hold the button on side of the buckle (Fig. 20 ) to
release the belt. Make same operation on both sides. To release belts and unleash your
baby, press the middle button (Fig. 20).
10- The back-rest of our swing is adjustable in different positions (Fig. 21). Hold the
regulation block behind the back-rest, pull upward the release lever (Fig. 22) and select
the desired position. DO NOT make any adjustment operation with the baby sitting
inside!
CLOSING
:
11- To close your swing, press simultaneously the two release buttons on the sides of the
joints (Fig. 23). Press the buttons and rotate the front legs inward (Fig. 24 and 25). Now
the product is closed and you can store it in a small space (Fig. 26).
ELECTRICAL POWER
:
"Swing" has a toy-bar with toys, light and sound, sweet melodies, natural sounds and
adjustable oscillation of the seat in different speeds with timer.
There are two ways of power supplies:
1- Using the power adapter AC/DC INCLUDED in the packing (Fig. 27); insert the plug into
the socket (Fig. 28) right to the end.
2- Using 4 batteries "D" type, size 1.5V, batteries NOT INCLUDED. The batteries should be
put inside the specific compartment on the joint with toys. Use a screwdriver and remove
the cover (Fig. 29).
19
