Pleiger Elektronik
GmbH & Co. KG
Edition: 6/2007 Subject to modifications
Manual for 362MC
Page: 9
5
Commissioning extension
The menu selection option of the 362MC can be extended for the purposes of commissioning the con-
troller. The extended functions for altering the configuration or parameterisation are available in both
Automatic and Manual / Emergency manual mode. The menu extension is accessible after entering the
password. This password lock serves to provide protection against unauthorised use.
5.0
Password entry
If no password has been entered (
PW-lock=On
), the password lock will be deactivated
to enable access to the extended commissioning menu by entering the currently valid password.
To this end, digits 1 to 4 have to be set to the stored
value for the password, in each case beginning from a
value of 0.
After input of the 4
th
digit, shown in the example here as password 1234, the value is compared against
the stored password. If the entered value corresponds to the stored password, the password lock will be
deactivated (
PW-lock=Off
); if the entered value does not correspond to the stored password, the pass-
word lock will remain active.
The password status is retained when the voltage supply for the controller is switched on and off.
On delivery, the password 0362 is stored for the 362MC.
Please alter this password to protect your specific settings.
Setpoint menu
Password menu
Value+1
Value-1
Digit 1
Value entry
Value+1
Value-1
Digit 2
Value entry
Value+1
Value-1
Digit 3
Value entry
Value+1
Value-1
Digit 4
Value entry
compare
value
(example)
