4
COMPOSITION
Solar system
ECO COMPACT
is composed of the following articles:
n.1 ECO COMPACT tank (available in sizes 200 liters, 300 liters, 500 liters).
n.1, 2 or 3 solar collectors (X-RAY10, UNIKO, KSFG-25 or CSI model).
The number of collectors depends on the size of the tank, according to the following scheme:
-
n.1 collector for 200 liters;
-
n.2 collectors for 300 liters;
-
n.3 collectors for 500 liters.
n.1 expansion vessel (18 liters for 200 liters, 24 liters for 300 liters, 35 liters for 500 liters).
n.1 sensor pocket.
n.1 thermostat valve 35 ° / 60 ° C.
n.1 fittings for the plumbing connection to solar collectors (depends on the type and the
number of collectors).
Solar and antifreeze liquid (depends on the type and the number of collectors).
GENERAL INFORMATION
Installation must be carried out only by qualified personnel according to safety norms and
regulations and as instructed in this document. Only original components specific for this solar
system must be used.
Before installation and start-up, please consult local norms, laws and by-laws.
Suitable restraining belts must be used during collector and tank transport. Do not lift the collector
and the tank by the screw thread connections. Avoid hitting the collector and fragile glass tubes
which might smash.
ECO COMPACT TANK
Description
Tank with double glazing in accordance with DIN 4753, available in sizes 200-
300-500 liters, two fixed exchangers, predisposition for electrical resistance on
a sleeve at the center part of tank, rigid polyurethane foam insulation and
finish with PVC outer white.
Complete with two-way compact solar station with pump high efficiency,
safety unit 6 bar with manometer, solar control unit, 3 PT1000 temperature
sensors, all these fully assembled and wired in a frontal cover made of ABS
red.
