40
Technical manual – Installation instructions and start-up X-RAY R - ver. 1.0 del 07/11/2018
Alternatively, connect the collectors to several parallel rows, making the hydraulic connections in a balanced
manner, as shown below.
It is advisable to provide for the arrangement of several probes, on the respective collector strings, in
order to interchange them in the event of a fault and to be able to verify the correct balancing of the
circuit in operating conditions.
For larger systems with for example more than 6 X-RAY 15 collectors, they can be arranged in two rows.
Care must be taken to balance the system by making a connection between the two series.
Attention: both rows must have the same number of collectors (see diagram).
LARGE SYSTEM
>