Section 4. Using Your PlexWriter
PlexWriter 12/10/32S Operation Manual
41
Figure 21: Wipe the Disc from the Center Outward
HINT: Keep your frequently used discs in jewel cases at all times to prevent them
from becoming dirty or damaged.
Playing Audio CDs
In order to listen to an audio CD, connect an audio cable to the analog audio
connector on the rear of the drive and connect the other end to your sound board.
There are two types of audio you may encounter:
•
CD-Audio: This comes from audio discs (like the ones used by your home
stereo) that are translated directly by your PlexWriter into sound. Although, in
most cases a sound board and speakers are used to hear this audio, you can also
listen to it by simply plugging a set of headphones or powered speakers into the
headphone jack on the front of your drive, as shown in Figure 22. You can
control audio playback through software.
Figure 22: Connections for Playing Audio Using the Headphone Jack
