www.plhitalia.com
Neo Lighter
cod.
NA.LT.4_A01
How to use it
Check the instructions below for the configuration.
PLH Neo Lighter is provided with 4 functions: click, rotate 30° CW, rotate 30° CCW and shake (strong)
How to change the battery
Upside down the Neo Lighter and open the bottom rubber cover. Take out gently the battery holder.
Release the old battery sliding it, and change with the new one CR2032.
Respect the + symbol on the top.
Click the push button and check the functionality and the blue led on.
Reinsert the battery holder in the housing and close again the rubber cover and be sure it’s all well fixed
on the bottom.
The PLH Neo Lighter is supplyed with the 8452 firmware preinstalled
© 2019 - epic srl - All rights reserved
Page | 5
2
neo
lig
hte
r
Battery holder
Rubber cover
