background image

Neo Lighter

 

cod.

 

NA.LT.4_A01

 

5. Change the profile of a Neo Lighter 

When the Neo Lighter is added, it will be visibile 
from the menu More / Switches. 
Remember that after 6 second the Neo Lighter fall 
in sleep. During the process of the upgrade of the 
Profile always click the main push button. Release 
only at the end of the process. 

To change the profile of a Neo Lighter go to 
the Menù More / Switches.  
The Neo 2 P Inv, or the other profile changed, 
will be greyed.  

Click on it and scroll bottom the menù.  
Then to show the 

Unpair device

 you need to: 

-

click the main push button and shake 
strongly the Neo Lighter (for the profile Neo 
2 P Inv and Neo 2 P) 

-

click the main push button and rotate at the 
same time the same button (for the profile 
Neo 4 P) 

After the device is unpaired click again the 
main push button, and continue press it, and 
go on the 

More…/Nearby

 menu’ . 

Click on the Neo Lighter icon.  
When you click on it the app will ask to ‘Change  
profile’ too. 
Change profile give you the chance to change 
the firmware, then the settings of the push 
buttons. Check the list on first page then  
select the desired profile 
Add again the Neo Lighter to your Network.  

Don’t forget. Every time you perform this 
operation you will discards all the setups. 
Only when you end the process release the 
push button and continue from the step 5 

6. Update the firmware 

Time to time the firmware update window will 
appear for some maintanance stuff.  
Then perform the update clicking on 

Start 

update. 
Don’t forget to take pressed the main push 
button till the update is not ended.

 

7. Troubleshooting 

1) The Neo Lighter is a battery device. If not 

function check the blue light turn on when 
you click the main push button. If not, 
change the battery following the 
instructions. 

2) The Neo Lighter use the bluetooth signal, 

for communicate between the devices. 
Refer to the Casambi website to discuss all 
aspects related to this technology. 

3)  You can control devices in a range up to 

10m but it strongly depends by the 
surrondings. If the ‘receiver’ device like a 
Casambi Dimmer, is inside of a metal box 
this range can reduce significatevely.

© 2019 - epic srl - All rights reserved

Page    | 5

5

Reviews: