What's in the Box?
l
CrewCom Copper Hub (1) OR CrewCom Fiber Hub (1)
l
USB A to Micro B Cable
l
Cat 5e Cable, 6 ft. (1.8 m)
l
Fiber Cable, 6 ft. (1.8 m) (Fiber Hub Only)
l
Rubber Feet
l
48VDC External Power Supply*
l
Product Overview Guide
l
Warranty Extension Registration Card**
*Note:
Power Supplies vary by CrewCom Hub model, and they are not interchangeable. Always
ensure your Hub uses a compatible power supply: PPS-48V-02 with CHB-8C-02 and CHB-8F; PPS-48V
with CHB-8C.
**Note
: A one-year product warranty is standard with CrewCom products. Follow the product
registration instructions on the Warranty Extension Registration Card and visit Pliant's
to extend your product warranty to two years at no charge. See
Additional Items Required
In addition to your Copper or Fiber Hub, at least one of each of the devices listed below is required to complete your
CrewCom System (sold separately with included components):
l
Control Unit (includes AC Power Cord; USB A to Micro B Cable; Cat 5e cable, 15 ft. (4.6 m); and USB Flash
Drive)
l
Radio Transceiver (includes USB A to Micro B cable; Cat 5e cable, 15 ft. (4.6 m); Mounting Hardware/Bracket;
and 2 Omni-Directional Antennas)
Introduction - 6
Summary of Contents for CrewCom CHB-8C
Page 1: ...Hub OPERATING MANUAL...
Page 2: ...ii...
