W A R N I N G !
depower loop is not pulled first.
if there is no other way, as it will completely disconnect you from your kite.
A loose kite might result in dangerous situations for bystanders or other kite
flyers and may also result in permanent loss of the kite.
• After using your safety system, putting tension on any of the other lines can
T I P S R E G A R D I N G S A F E T Y S Y S T E M S
• Check if your quick releases are in working order before every launch!
• Regularly rinse your bar and safety systems with tap water.
Activating the secondary quick release
Re-connecting the secondary quick release
To activate your secondary quick release, move the red release in the direction
of the arrow.
Re-connect the secondary safety release by placing the loop over the stainless
D E P O W E R L O O P
L O C K - I N P I N
To prevent accidental unhooking of
your depower loop, you can use the
lock-in pin. Place the lock-in pin
through the spreader bar hook, just
below the depower loop tube.
