5
61
Open the slide door (A).
Unlatch and pull out the slide (B).
Open “B” (C) and “C” (D) baffles if needed.
Remove any misfeed(s).
Push in and latch the slide.
Always remove any residual waste from waste channel and waste belt before closing the
slide door.
Close the slide door
.
Rotator, registration and creaser area
Clearing jams in the waste transport
The waste transport is easily accessible through the slide door. Shreds jammed in or wrapped
around the knife assembly are also accessible through the slide door.
Caution!
Under no circumstances should jams around the trimmer blades be cleared using metallic
tools. The edges are very fragile and easily damaged.
A
B
C
D
Summary of Contents for BOOKLET MAKER Pro 30
