User Interface (GUI) - Operator Menu
24
Plockmatic PowerSquare™ 160 - Service Training Workbook
4.8
The Messages Tile
The message tile shows information, alerts and errors about the machine.
The border colour indicates the nature of the message.
Touch the tile to open the Message window with more information.
4
Form Pressure
Use to increase or decrease the pressure used to
form the spine.
Touch
+
to increase the amount of spine form. Touch
–
to decrease the amount of spine form. The range is -9
to +9. The default setting is 0.
5
Form Threshold
Use to choose if a square spine is formed.
If the set is thinner than the threshold value, a square
spine is not formed.
If the set is thicker than the threshold value, a square
spine is formed.
If the set is 1.5mm or thicker, a square spine is always
formed.
The default value is 0.8mm. The allowed range is
0.1mm to 1.5mm
6
Book Skew
Use for adjustment if the finished book is not square.
7
Set Defaults
Touch
Set Defaults
to return the settings in this window
to the default values.
No.
Component
Function
Use the ‘-’
Use the ‘+’
An amber border indicates the status of
the machine and can advise the operator
that an action is needed soon, such as
empty the trim bin or replace a staple
cartridge.
A red border indicates that the
machine has an error. The operator
should take corrective action.
Summary of Contents for Morgana PowerSquare 160
Page 72: ...Glossary of booklet making terms 68 Plockmatic PowerSquare 160 Service Training Workbook...
Page 73: ......
Page 74: ......
Page 75: ......
