Installation manual SR85/CF COVER FEEDER
Figure 9, view of Feed roller assembly
17. Tighten the screws one and a half revolution.
18. Install the upper end of the Gas spring to the upper hole on the Top cover,
according to figure 8
Paper Bin
spring
Paper Bin
spring
Feed roller
assembly
19. Connect the PSH and the ground wire to the rear of the Cover Feeder. Secure
the PSH with a cable holder on the rear side of the Booklet maker Top cover.
20. Install the Feed roller assembly. Figure 9.
21. Connect the two paper bin springs, according to figure 9.
Gas spring installed
in the upper hole
1-13