NOTICE
Please read instruction manual before usage
Installation of MAM
—
8** can be performed only by professional technicians
Assembling position shall be considered carefully during mechanical installation in order to ensure
good heat dissipation and reduce electromagnetism interferences
Wiring shall be performed respectively according to regulations for heavy and weak current to reduce
electromagnetism interferences
Surge absorber must be communicated with inductive load such as AC contactor of output control of
relay
Output wiring shall be inspected carefully before switch up
Earthing terminal of this body part shall be earthed correctly (the third type of earthing) to increase
product’s capacity of resisting signal noise.
Motor’s rated current (current for stopping instrument automatically) shall be set according to rated
current indicated on motor’s name plate
×
overload current multiplication factor of
motor/ 1.2
Features
：
●
LCD Chinese / English display
●
With control functions of starting, stopping and operation for motor.
●
With protection functions of preventing reverse rotation of air compressor.
●
Temperature measurement and control
●
Automatic adjusting of rate of load and controlling of pressure balance
●
Selections of remote and local control
●
Selections of interlocking and independent
●
Function of RS485 communication
