plottiX iXpress, User Manual

Index

  Safety Instructions  

1

  In the Box  

2

  Product Features  

3

  Display  

4

  Controls  

5

  Operating Instructions  

6-7

  Recommended Settings  

8

  Troubleshooting  

9

Safety Instructions

Please read this manual carefully before using the device for the first 

time. Remove all packaging before using the device. The device is inten-

ded for household use. If it is used in an inappropriate manner or in a 

manner different from that described in this manual, the manufacturer 

assumes no liability and the warranty is void.

  Do not pull on the power cord of the appliance to unplug the device. 

Always unplug the device from the power outlet when not in use.

The device must be used on a flat, stable and heat-resistant surface. 

Make sure that the heat-resistant tray of the transfer press is also on a 

stable, flat and heat-resistant surface.

  The device is not suitable for persons whose physical or mental integri-

ty or their perceptive abilities are limited, or for persons with insufficient 

knowledge and experience.

  This product is not suitable for children. Make sure that the device is 

not suitable for playing. Make sure that the device and the power plug 

are out of reach for children under the age of 8 years.

  Do not leave the device unattended while it is connected to the power 

supply or has not cooled down (approx. 1 hour after use).

Do not use the device if it shows visible damage, has been dropped or 

does not operate as intended.

  Check the power plug and power cord for any damage or attrition be-

fore using the device. Roll off the power cord completely before plugging 

the machine into the power outlet. The power cord should not get in 

contact with sharp edges or heat sources. Also prevent contact between 

cable and pressing surface of the device. If the power plug or power cord 

is damaged, it must be repaired before use.

  Do not open the device or other components (including the power plug 

and cable). Repairs may only be carried out by authorized workshops. 

  Never immerse the device in water or other liquids.

  The pressing surface of the device can reach very high temperatures: 

Do not touch it!

  Let the device cool down completely before storing it (approx. 1 hour 

after use).

  Please keep the user manual for future reference!
  Tip: Keep the original carton. The transfer press is optimally protected 

in there and allows a safe transport in case of warranty.

  This device contains raw materials that can be recycled. Please dis-

pose of this device in an environmentally friendly manner at a collection 

point in your town or municipality.

General Danger 

Symbol

Danger from hot 

Surfaces

Danger of bruises

Plug out the power 

cable

1

WEEE-Reg.Nr. DE72497967