Welcome
Thank you for purchasing the Plugwise Energy Management System, the system that monitors and controls your
energy consumption.
This User Manual provides you with information about installing the system, the use of the software, technical
details and safety matters.
Installation
Install the software (Source)
Go to the site www.myplugwise.com and follow the steps as they appear on the screen.
•
Download the installation-file and execute the installation.
•
The installation-wizard starts up.
•
Follow the steps and press “complete” . The software will be installed automatically on your computer.
•
Extensive information will be found in the User Manual which will appear when you click on the
•
Question-Mark Icon, located on the lower right side of the program.
CONFIGURATION OF THE NETWORK
After the installation of the software is complete, the configuration- wizard starts up automatically.
•
Complete the steps ‘Welcome’ and ‘Licence’. You can find the Licence Code (25 characters) on the
•
installation list. If you cannot proceed after having filled in the Licence Code, please verify if you have
used the correct code and your firewall does not block the internet access. Allow the Plugwise Configuration
Wizart full access in your firewall . If needed , cancel the installation and complete the steps again.
The next step ‘Security’ of the wizard makes sure that your network is secure.
•
Part I:
Registration of the plug-ID’s. Enter the plug-ID of the and of the rest of the
Circle(s).
The plug-ID (five characters) is located on the sticker attached to the back of the plug. Do
not remove the sticker yet.
Part II:
Enter your personal password. This will prevent undesirable third parties’ access to your
network.
Attention: your personal password must consist of a minimum of 6 and a maximum of 10
characters.
Unfold this User Manual for continuation of the installation process.
Be wise, plug in.
