12 | Stretch 3
regularly.
Enable WPS on the WiFi router to
connect to WiFi. Wait until the Stretch
has booted up: the upper light
(WLAN) and the light in the middle
(STATUS) of the Stretch are on when
connected to the network.
If after 2 minutes the Stretch has not
made a connection yet to your WiFi
network, the Stretch will return back
to the access point mode: the upper
(WLAN) light and the light in the
middle (STATUS) are blinking slowly.
WiFi?
Do you want to connect
the Stretch to WiFi and
you have an Android
smartphone or tablet?
Search for the Plugwise Connect app
in the Google Playstore. The app will
guide you connecting the Stretch to
the WiFi network.
No Android? Follow the steps below to
connect the Stretch to the WiFi network.
Connect your smartphone or tablet
to the WiFi network of the Stretch,
starting with ‘stretch_’.
Enter the short ID as your password.
Open the web browser on your
smartphone or tablet and navigate to
a random web address. Because you
are connected to the network of the
Stretch, you will be redirected to the
web page of the Stretch.
Go to the settings via the button in
the bottom right of the web page .
Go to the WiFi/LAN settings.
Press ‘Scan’ and select your own WiFi
network.
Enter the password of you own WiFi
network and save the settings. Wait
until the Stretch has booted up: the
upper light (WLAN) and the light in
the middle (STATUS) of the Stretch
are on when connected to the
network.
Network cable?
Connect a network cable between
the router and the Stretch.
Restart the Stretch by plugging the
adapter out and into the wall socket.
Wait until the Stretch has booted up:
the light in the middle (STATUS) and
the lower light (LAN) are on when
connected to the network.
4. Validate the network connection?
Open the web page of the Stretch
Make sure that your smartphone or
