13 | Stretch 3
EN
tablet is reconnected to the same
network as to which the Stretch is
connected to. This is also necessary
when you want to add the Stretch to
the Plugwise app.
Go to connect.plugwise.net.
Use your short ID to log in. You will
be redirected to the web page of the
Stretch when the Stretch is
connected to the network.
Having trouble using WiFi?
Reset the network connection
Press the black button on the Stretch
for 5 seconds until the light in the
middle (STATUS) has blinked 5 times
and the upper light (WLAN) starts to
blink rapidly.
The network settings will be deleted.
Wait until the Stretch has booted up,
then try to connect the Stretch to
your WiFi network again.
First connect the network cable
Connect a network cable between
the router and the Stretch.
Restart the Stretch by plugging the
adapter out and into the wall socket.
Follow the steps “Validate the network
connection? - Open the web page of the
Stretch” on the previous page to open
the webpage of the Stretch.
Go to the settings via the button in
the bottom right of the web page .
Go to the WiFi/LAN settings.
Select your own WiFi network, enter
the password of your own WiFi
network and save the settings.
Disconnect the Stretch from the
network cable when instructed.
