PLUM Sp. z o.o. Ignatki, ul. Wspólna 19, 16-001 Kleosin tel. +48 857497000 fax +48 857497014
www.plummac.com plum@plummac.com
INSTALLATION MANUAL
Name:
Pressure recorder
Type:
MacR6
Variant:
Z0 & Z0-P
Communication protocol:
GAZMODEM2
1. PREPARING THE DEVICE
•
Remove six TORX T10 screws from back of the
cover.
•
Next place the Micro SIM card into the holder as
shown in the picture. There is no need to remove
the battery to insert the SIM card.
•
In the next step put the device together and
tighten
the
screws
with
0,65-0,75Nm
momentum.
SIM card and antenna assembly is allowed only out of the hazardous explosive
zone.
•
Delivered devices may have the display turned off. To wake it up close the magnet (i.e. OptoBTEx
head to the OPTICAL INTERFACE window. SLEEP 3 sign will appear. Repeat closing magnet until
START sign will appear. Procedure presented in the tutorial movie =>
red QR code.
RELATED TO FIRMWARE:
PROGRAM SERIE: MacR6-P S001.04
Document version: 1.1
January-2019
