Installation Procedure
DO’s
1. Do mount the thermostat at eye level.
2. Do read the instructions fully so that you get the best
from our product.
DON’Ts
1. Do not install near a direct heat source as this will affect
the workings of the thermostat.
2. Do not push hard on the LCD otherwise you will damage
the liquid crystal display and this is not repairable.
Installation
The thermostat is designed to be lush mount, a back
box of 35mm should have been sunk in the wall prior to
installation.
Step 1
Carefully separate the front half of the thermostat from the
back plate by placing a small lat head terminal driver in to
the slots on the bottom face of the thermostat.
5