Automist Smartscan
®
Handbook v1.2.3
Plumis Ltd Copyright © 2017. All Rights Reserved.
Page 36 of 64
S MA RT SC AN
®
•
Tighten the wires of the Smartscan Head Cable into the screw terminals.
IMPORTANT: Failure to
preserve the colour coding (i.e. cable sequence) between head and pump is likely to damage
the head beyond repair.
•
Tighten the cable strain relief to ensure that any movement of the cable does not result in
movement or tension at the terminal block.
•
Slide the head into the rectangular hole (89+/-2mm wide x 117 mm high) and fasten in place using
the box “old work” mounting clips provided. The clips lock the spray head
tightly to wall plaster, dry
wall of any thickness up to
¾”
, concrete block, brick or concrete wall.
•
Attach and fasten the front plate to the intermediate plate and align, ensuring parallelism to floor
and wall. You can align the Front Plate in reference to the floor at this stage.
Spray head
Smartscan
Data Cable
Terminals
Cable lock
“old work”
mounting clips
