5
HOW TO USE
WHEN SLIDING THE SCREEN FORWARD...
Manual sliding
It is also possible to slide the board screen manually. In
this case, it can be slid in either direction; to the right and
left. However, manual sliding at an excessively high speed
must be avoided as it occasionally causes problems.
Sliding by using key
Press the feed/stop key. Then, the board screen slides to
the left by one page and stops. It stops immediately when
the feed/stop key is pressed during the sliding operation.
Press the opening button to open
the printer cover.
Take out the winding core of used recording paper.
WHEN REPLACING RECORDING PAPER...
*Concerning replacement of recording
paper
Replace with new recording paper in the following cases:
When a red line appears at the end of the recording paper.
(A red line appears when only about one meter or so of
recording paper is remaining.)
When the paper warning lamp lights red.
As illustrated, set it in so that the
tip of the new roll of recording
paper extends about 20cm from
the outlet.
