E-50
Projector Options [Setup]
Orientation
Select the method of projection onto the screen. Set
this to project images from the front or back of the
projector.
Select the mode from the “Orientation” pull-down list.
Desktop front ..... Project from the front of the projector installed
on a table.
Ceiling Rear ....... Project from the rear of the projector installed
on the ceiling.
Desktop Rear ..... Project from the rear of the projector installed
on a table.
Ceiling Front ...... Project from the front of the projector installed
on the ceiling.
Cinema Position
Select the vertical position of the picture when the
cinema mode is set for “Aspect”.
Select the mode from the “Cinema Position” pull-down list.
Top ............. There is a black section at the bottom edge.
Center ......... There is a black section at both the top and bottom
edges.
Bottom ....... There is a black section at the top edge.
Background
Set the color of the background when there is no input
signal.
Select the color from the “Background” pull-down list.
Blue ............ The background is blue.
Black ........... The background is black.
Logo ........... An image is displayed on the background.
Note:
• No logo is registered upon shipment from the factory.
When “Logo” is selected, the logo is displayed on a black
background.
• Backgrounds you have created can be set at “Background”.
See “Setting the background logo” on page E-59.
