Switch on the
function to enable sending the scanned file to the desired e-
mail addresses.
Press the
button to set the mail server. Enter
Server
,
Port
,
Account
and
Password
then press
OK
to test the mail server setting.
If the
connection is success, the mail server information will display on the top of the page.
Enter
Sender
,
Sender address
and
Attachment Size(MB)
to complete the settings.
FTP
Switch on the
FTP
function to enable sending the scanned file to the desired FTP
server.
Press the
button to set the FTP server. Enter
Server
,
Port
,
Account
and
Password
then press
OK
to test the FTP server setting.
If the
connection is success, the FTP server information will display on the top of the page. If
the preset FTP server is the only destination, you can activate
Use this FTP as the
only destination
function.
33
