background image

26 

THIS LIMITED WARRANTY REPLACES ALL OTHER WARRANTIES, EXPRESS 

OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABLITY AND FITNESS FOR A PARTICULAR PURPOSE. HOWEVER, 

SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF 

THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE 

LIMITED IN DURATION TO THE WARRANTY PERIOD. NO OTHER WARRANTIES 

APPLY AFTER THAT PERIOD. 

Some jurisdictions do not allow limitations on how long an implied warranty lasts, 

so the above limitation may not apply. 

Under no circumstances are we liable for any of the following: 

1.  Third party claims against you for losses or damages. 

2.  Loss of, or damage to, your records or data; or 

3. Economic consequential damages (including lost profits or savings) or 

incidental damages, even if we are informed of their possibility. 

Some jurisdictions do not allow the exclusion or limitations of incidental or 

consequential damages, so the above limitation or exclusion may not apply to you. 

This Limited Warranty gives you specific legal rights, and you may also have other 

rights that vary from jurisdiction to jurisdiction. 

FCC Radio Frequency Statement 

This equipment has been tested and found to comply with the limits for a Class B 

digital device, pursuant to part 15 of the FCC rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation.  

This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not 

occur in a particular television reception (which can be determined by turning the 

equipment off and on), the user is encouraged to try to correct the interference by one 

or more of the following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment to an outlet on a circuit different from that which the 

receiver is connected. 

 

Shielded interconnect cables and shielded power cord which are supplied with 

this equipment must be employed with this equipment to ensure compliance 

with the pertinent RF emission limits governing this device. 

 

Consult the dealer or an experienced radio/TV technician for help if the 

conditions persist. 

Summary of Contents for MobileOffice































Reviews: