Plustek OPTICPRO ST64, User Manual

• 

The rectangular end of the USB cable is plugged into the back of your 
computer. 

If you deviated from the installation procedures defined in this manual, please 

unplug the USB cable from the scanner and reinstall the software from the CD-ROM. 
To reinstall your scanner’s software, click [Start] 

|  [

Run], then type [D:\Setup] (where 

D represents the letter of your CD-ROM drive). Carefully follow all the installation 
instructions presented in the Setup Wizard.  Reboot your computer when prompted, 
and plug the USB cable back into the scanner while your computer is still turned on. 

Installing Additional Software 

Your scanner is TWAIN compliant and functions with virtually all available 

TWAIN compatible software.  If you purchase additional software to be used with 
your scanner, please make sure that it conforms to the TWAIN standard. 

Scanner Setup After Windows XP Upgrade 

If you plan to upgrade your operating system from Windows 98 or Me to 

Windows XP after having installed the scanner software, please follow the 
instructions below: 

1.  Unplug the scanner’s AC power adapter from the electrical outlet. 

2.  Unplug the scanner’s USB cable from the rear of the computer. 

3.  From the Windows [START] menu, point to [Programs] and then [Your 

scanner model name]. In the pop-up menu that opens, click on [Uninstall 
USB Scanner]. Follow the on-screen instructions to remove all the scanner 
software. 

4.  After uninstallation completes, close all open applications and click the 

[Finish] button to restart your computer. 

5.  Start installing your Windows XP upgrade software by following Microsoft’s 

related procedures. 

6.  When the Windows XP upgrade is done, re-install the scanner’s hardware 

and software. Refer to the scanner setup quick guide for details. 

8