background image

45 

S

TATEMENT OF 

L

IMITED 

W

ARRANTY

 

This Statement of Limited Warranty applies only to the options you originally 

purchase for your use, and not for resale, from an authorized reseller. 

The manufacturer warranty includes all parts and labor, and is not valid without the 

receipt of original purchase. To obtain warranty service, you may contact the 
authorized dealer or distributor, or visit our website to check out the available service 
information, or send a request via E-mail for further help. 

If you transfer this product to another user, warranty service is available to that user 

for the remainder of the warranty period. You should give your proof of purchase and 
this statement to that user. 

We warrant that this machine will be in good working order and will conform to its 

functional descriptions in the documentation provided. Upon provision of proof of 
purchase, replacement parts assume the remaining warranty of the parts they replace. 

Before presenting this product for warranty service, you must remove all programs, 

data and removable storage media. Products returned without guides and software will 
be replaced without guides and software. 

This Limited Warranty service does not provide for carry-in exchange when the 

problem results from accident, disaster, vandalism, misuse, abuse, unsuitable 
environment, program modification, another machine or non-vendor modification for 
this product. 

If this product is an optional feature, this Limited Warranty applies only when the 

feature is used in a machine for which it was designed. 

If you have any questions about your Limited Warranty, contact the approved 

retailer from whom you bought the product or the manufacturer. 

THIS LIMITED WARRANTY REPLACES ALL OTHER WARRANTIES, EXPRESS 

OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. HOWEVER, 
SOME LAWS DO NOT ALLOW THE EXCLUSION OF IMPLIED WARRANTIES. IF 
THESE LAWS APPLY, THEN ALL EXPRESS AND IMPLIED WARRANTIES ARE 
LIMITED IN DURATION TO THE WARRANTY PERIOD. NO OTHER WARRANTIES 
APPLY AFTER THAT PERIOD. 

Some jurisdictions do not allow limitations on how long an implied warranty lasts, 

so the above limitation may not apply. 

Under no circumstances are we liable for any of the following: 

1.  Third party claims against you for losses or damages. 

2.  Loss of, or damage to, your records or data; or 

3. Economic consequential damages (including lost profits or savings) or 

incidental damages, even if we are informed of their possibility. 

Summary of Contents for PS3150U



















































Reviews: