Plustek SmartOffice PS286 Plus User Manual Download

Page: 23 / 220

LACING

OCUMENTS

1. Load the documents, headfirst and face down, toward the center of the ADF

paper chute and all the way into the ADF until touching the bottom.

For single-sided scans, load the documents face down so that the side to be
scanned faces towards the paper chute.

For double-sided scans, load the desired page order of documents face down
so that the side to be scanned faces towards the paper chute.

2. If you need to scan longer documents, unfold the paper chute extension and

side guide to provide further support for the documents.

3. Adjust the paper width slider for the paper size you are using. The paper width

slider should be gently touching both sides of the documents.

Summary of Contents for SmartOffice PS286 Plus




























































































































































































































Search results

Summary of Contents for SmartOffice PS286 Plus

Reviews:

Related manuals for SmartOffice PS286 Plus

Brands by name

Popular brands

Plustek SmartOffice PS286 Plus, User Manual

Search results

Summary of Contents for SmartOffice PS286 Plus

Reviews:

Related manuals for SmartOffice PS286 Plus

Brands by name

Popular brands