incline;
3.8
Operating keypad: Under standby status, enter into running status after press keypad;
3.9
Stop keypad
：
Under running status, enter into stop status after press keypad;
3.10
PROGRAM : Enter into optional mode
（
P1
～
P8
、
U1
～
U2
、）；
（
default manual setting when open
machine
）
3.11
ENTER: Used to confirm parameter setting or exit mode setting after press keypad;
3.12
RESET
：
Under stop status, all of parameter return to zero after press it;
3.13
MODE
：
With four countdown mode
（
time,distance,calorie,rehibilitation
）。
（
Tips
：
With an efficient keypad,buzzer will make long sound; when the keypad is inefficient,
buzzer will click two times
）
4
Operation
Power on, buzzer makes a long sound, luminous tube, digital tube and lattice screen will show within
3seconds, meanwhile, lifting motor declines to the lowest level, then recover to level.
（
the lowest station is
level
）
, enter into standby status after 3 seconds. Time window show“00
：
00”, incline window show“0”, heart
rate show “P”, distance window show “0.00”, calorie window show “0”
，
speed window show “1.0”
，
at this
time, you can operate the console.
5
Setting mode
Under the standby status, press “set” keypad that can switch 4 setting functions
（
time, distance, calorie,
rehibilitation
）
. Press speed keypad to set various parameter value. When inverse parameter counting return to
zero, enter into shutdown program mode, speed and incline will be halved, the countdown time is 150seconds,
while count to 15seconds, the warning of buzzer will ready to stop.
5.1.1
Countdown mode
5.1.1.1
Press "set" keypad with one time, enter into countdown program, time window
flashing, show the default time 30
：
00, accelerate and decelerate keypad can be used to
change the time; when operating, countdown with the set number. When return to zero,
enter into stop status, speed and incline will be halved, the countdown time is
150seconds, while count to 15seconds, the warning of buzzer will ready to stop.
5.1.1.2
Distance window
：
When start running, show “3”
、
“2”
、
“1” 3 seconds countdown
；
while stop using, buzzer click one time; Light runway gradually be lighten,
（
one round
of 400-meter runway which made by 46 lights
）
, the center position of runway
（
to
window
）
show the actual running distance.
5.1.2
Countdown distance mode
5.1.2.1
Press "set" keypad on the second time, enter into distance countdown program,
distance window flashing, show the default distance value 5.00; show running distance
by countdown. Change distance value by the accelerate and decelerate keypad, when
operating, countdown with the set number. When return to zero, enter into stop status,
speed and incline will be halved, the countdown time is 150seconds, while count to
15seconds, the warning of buzzer will ready to stop.
5.1.3
Countdown distance mode
5.1.3.1
Press “set”keypad on the third time, enter into calorie countdown program, calorie
window flashing, show the default value is 100; show running calorie by countdown;
Change distance value by the accelerate and decelerate keypad, when operating,
