countdown with the set number. When return to zero, enter into stop status, speed and
incline will be halved, the countdown time is 150seconds, while count to 15seconds,
the warning of buzzer will ready to stop.
5.2
Program
5.2.1
Fixed program
5.2.1.1
Under standby status, press “program” keypad one time, enter into fixed program 1;
press “program” keypad two times, enter into fixed program 2
,,,,,,
press “program”
keypad eight times, enter into fixed program 8. The distance window show the
accordingly number.
5.2.2
User program
5.2.2.1
Under standby status, press “program” keypad ten times, enter into user program 1;
press “program” keypad eleven times, enter into user program 2. The distance window
show the accordingly number.
5.2.2.2
Under user program, time window flashing, show the default time 30
:
00; change
time by the accelerate and decelerate keypad; press “enter”keypad once, speed window
flash
;
enter into various setting time slot.(totally 16). Press “the accelerate and decelerate
speed” keypad, can set speed value in various time slot. Press “enter” keypad two times,
enter into the second time slot; press “the accelerate and decelerate speed” keypad, can
set speed value in various time slot. Then, totally 16 sections.
5.2.3
Rehibilitation program
5.2.3.1
Under standby status, press “program” keypad 9 times, enter into rehibilitation mode;
enter into rehibilitation program, speed window flashing, show the default speed 1
kilometer; speed adjustment range
(
0.8KM-8KM
)
. After running, speed adjustment
0.8KM-8KM, the shortcut keypads can be used.
5.3
Manual mode program:
5.3.1.1
Under standby status, manual mode as the default mode. The first luminous tube of
speed and incline is lighting all the time, press start/stop directly, the lattice screen
show “3”
、
“2”
、
“1” 3seconds countdown. Start the machine, press the accelerate and
decelerate speed keypad or direct keypad to adjust the speed value; press the accelerate
and decelerate incline keypad or direct keypad to adjust the incline value; Light runway
gradually be lighten,
(
one round of 400-meter runway which made by 46 lights
)
, the
center position of runway
(
to window
)
show the actual running distance. Press “stop”
keypad, the machine will stop running and counting; press “reset” keypad, all of the
parameter value will return to zero.
6
Heartbeat test
6.1
Both hands hold the steel sheet of heart rate sensor, when controller receive the heartbeat signal,
heart rate window will flash, and showing “P”, meanwhile, the indicator light of heart rate will
light, and show the accordingly heartbeat value after 5seconds.
6.2
Measurement before exercise, both feet stand on both sides of the edge of deck, both hands grip
heart rate sensor lightly, waiting for about 20 seconds, an accurate heart rate value will show on the
window.
6.3
Measurement after exercise, both feet stand on both sides of the edge of deck, both hands grip