130519/A ControlPro | Short user manual
EN - 28
7
ALERTS
!
In the WARNING mode the fan/system continues to run.
In the ALARM mode the fan/system stops immediately.
7.1 Warnings
All WARNING alerts result in a full screen pop-up alert. Some warning alerts are
accompanied by an acoustic signal (buzzer); refer to section 7.1.1, table column F.
Fig. 7.1 Example of a WARNING screen
After a warning has been solved, in most cases the warning will be reset automatically.
Some warnings must be reset manually; refer to section 7.1.1, table column D.
There are two ways to suppress a WARNING alert (including the buzzer, if applicable):
1. Push the SUPPRESS button on the HMI
2.
Push and hold the black button (FILTER CLEANING) on the Panel for 5 seconds
In case of a WARNING alert:
•
Suppress the WARNING alert (+ buzzer).
• Solve the problem that is displayed on the screen.
• If applicable: Push the RESET button.
If you are unable to solve the problem immediately, you can temporarily suppress the
WARNING alert. The WARNING screen will be minimized, but the yellow WARNING button
remains visibile on the Homescreen.
• Select the WARNING button on the Homescreen to show the warning details again and
proceed as written above.
7.1.1 Warning codes
A
B
C
D
E
F
Code
Warning
Action
Reset
A
uto / Manual
Warning LED
Buzzer
W101
Dustbin almost full
The dustbin is almost full.
Empty it.
A
√
W102
Dustbin full
The dustbin is full. Empty it.
A
√
W103
Filters clogged
The filter cartridges are saturated.
Replace all filter cartridges.
M
√
√
W104
Compressed air
No compressed air. The filter
cleaning system does not function.
Reconnect the compressed air
supply.
A
√
W105
Compressed air
(cleaning active)
No compressed air. The filter
cleaning system does not function.
Reconnect to compressed air
supply.
A
√
√
W106
Compressed air
valve error
Repair or replace the compressed
air valve. The address of the filter
block and the relevant filter position
is displayed.
M
√
W107
Fan Warning
- Danfoss
frequency inverter
Frequency inverter warning.
Consult the Manufacturer’s manual
for more detailed information on
the specific warning code.
A
√