ATTENTION
The VSR System is designed to operate under stan-
dard vehicle performance conditions. Re-generation
is not considered to be a standard vehicle perfor-
mance condition.
PUM_VSR_100209_EN
4/20
0
The VSR system is used in fire and rescue stations on vehicles
with vertical (top) exhaust pipes. The system can be applied to
single or multiple lines of vehicles per bay and also for ’’drive
through systems’’.
An automatic, mechanical exhaust gas extraction system,
specially designed for fire and rescue vehicles with top exhaust
pipes. The system is used to remove the poisonous petrol and
diesel gas fumes direct at the emission source, the exhaust
pipe.
When the vehicles reverse or drive in to the fire station, a
”catcher” box picks up on the special tapered connection on
the vertical exhaust pipe, aligning itself on the aluminium pro-
file both upwards and sidewards.
As the vehicles continue into the station, the exhaust pipe gli-
des along the rubber sealed profile until the vehicle is parked.
All of the poisonous exhaust gases being contained in the
profile under vacuum, to be extracted by a fan to the outside
of the building.
Upon a call-out, the vehicles glide out of the profile in a similar
way, and the track resumes it’s natural position by the use of
mounting springs.
Side view
Overview
Front view
Safety wire
Aluminium Rail
Stack adapter
Catcher
Support leg
Centering spring
5.
Area of use
Method of Operation.
