3 Main Menu
The main menu is shown when the MENU button is pressed in the default display, or when BACK is pressed
in the setup menu. The sub-menu options which appear depend on the last shown main sub-menu (in this
example power off):
t
w
o
t
w
o
r
e
m
o
t
e
1
.
1
P
o
w
e
r
o
f
f
Sub-menus
:
Power off, Setup
Actions
:
Rotary
: UP/DOWN: scroll up/down in the submenu list.
Buttons
: MENU: nothing.
BACK: default display appears (see 2).
PRESET: If pressed briefly the current preset shown for two seconds. If
held for more than two seconds the preset menu appears (see 4).
SELECT: dependent on submenu:
Power off
: turn off and shows standby menu (see 1).
Setup
: enters setup menu (see 3.1).
MUTE: a mute/un-mute command is sent to all channels. If mute is
enabled the display backlight will flash twice per second.
3.1 Setup Menu
The setup menu is shown when the SELECT button is pressed in the main menu with setup menu as the active
sub-menu, or when the BACK button is pressed in the channel aliases menu, the analogue input sensitiv-
ity menu, or the channel settings menu. Which setup sub-menu option appears is dependent on the last
shown setup sub-menu option. The last shown setup sub-menu option appears (in this example Channel
Aliases):
S
e
t
u
p
C
h
a
n
n
e
l
A
l
i
a
s
e
s
Sub-menus:
Channel Aliases, Analogue Input Sensitivity, Backlight (BL) Timeout
1: None (default), Further channel aliases 2: None, ... down to 14: none.
Actions
:
Rotary
: UP/DOWN: scrolls up/down through the sub-menu list.
Buttons
: MENU: nothing.
BACK: the main menu appears (see 3).
PRESET: if pressed briefly the current preset is displayed for two seconds.
If pressed for more than two seconds the preset menu appears (see 4).
SELECT
: dependent on sub-menu.
Channel Aliases
: enter Aliases Channel Select menu (see 3.1.1).
Analogue Input Sensitivity
: enter Analogue Sensitivity menu (see 3.1.4).
Backlight (BL) Timeout: enter BL timeout menu (see 3.1.3)
1: None: enter channel Settings Menu (see 3.1.4)
2: None: enter channel Settings Menu (see 3.1.4)
....
14: None: enter channel Settings Menu (see 3.1.4)
MUTE
: a mute/un-mute command will be sent to all channels and the
display backlight will flash twice per second when the mute is active.
Summary of Contents for TWOTWO
Page 1: ...User Guide remote control Serial No Hand built by ...
Page 2: ......