3.1.4 Channel Settings Menu
The Channel Settings menu is shown when the SELECT button is pressed in the setup menu with Channel Set-
tings menu as active sub-menu, or when the back button is pressed in main source menu, main trim menu,
twotwo HF shelf, twotwo LF shelf, twotwo LF Rollof, twotwo LF RollFR, or Subwoofer settings menus. The
selected channel in the setup menu and selected alias appears (in this example Left). The Channel Settings
sub-menu option which appears depends on the last shown sub-menu option (eg. Main Source).
L
e
f
t
M
a
i
n
S
o
u
r
c
e
Sub-menus
:
Main Source, Main Trim,
twotwo HF Shelf, twotwo LF Shelf, twotwo LF Rollof, twotwo LF RollFr
Actions
:
Rotary
: UP/DOWN: scrolls up/down through the sub-menu list.
Buttons
: MENU: nothing.
BACK: the setup menu appears (see 3.1).
PRESET: If pressed briefly the display shows the current preset for two
seconds. If held for more than two seconds the preset menu appears (see 4).
SELECT: depends on sub-menu:
Main Source
: enter Main Source menu (see 3.1.4.1).
Main Trim
: enter Main Trim menu (see 3.1.4.2).
twotwo
HF Shelf: enter HF Shelf menu (See 3.1.4.3)
t
wotwo
LF Shelf: enter LF Shelf menu (See 3.1.4.4)
t
wotwo
LF Rollof: enter LF Rollof menu (See 3.1.4.5)
t
wotwo
LF RollFr: enter LF RollFr menu (See 3.1.4.6)
MUTE: a mute/un-mute command is sent to all channels. The display
backlight will flash once per second when muted.
3.1.4.1 Main Source Menu
The Main Source menu is shown when the SELECT button is pressed in the Channel Setting menu with Main
Source as active sub-menu. The selected channel in the channel settings menu appears (in the example
below, Channel 1). Which Main source sub-menu option appears depends on the current main source (in
this example, Analogue XLR).
M
a
i
n
S
o
u
r
c
e
A
n
a
l
o
g
u
e
X
L
R
Sub-menus
:
Analogue XLR, Analogue RCA, Main AES3 Left, Main AES3 Right.
Actions
:
Rotary
: UP/DOWN: scroll up/down in the sub-menu list.
Buttons
: MENU: nothing.
BACK: the channel settings menu appears (see 3.1.4).
PRESET: If pressed briefly the current preset is displayed for two seconds. If
held for more than two seconds the preset menu appears (see 4).
SELECT: saves setting and sends to selected channel. The channel settings
menu appears (see 3.1.4).
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashes twice per second when muted.
Summary of Contents for TWOTWO
Page 1: ...User Guide remote control Serial No Hand built by ...
Page 2: ......