Submenus:
50Hz, 80Hz, 120Hz, 150Hz, 200Hz
Actions
:
Rotary
: UP/DOWN: scroll up/down in the sub-menu list
Buttons
: MENU: nothing.
BACK: the channel settings menu appears (see 3.1.4).
PRESET: If pressed briefly the current preset is displayed for two seconds.
If held for more than two seconds the preset menu appears (see 4).
SELECT: saves value and sends to selected channel. The channel settings
menu appears (see 3.1.4).
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashes twice per second when muted.
3.1.5 Subwoofer Menu
The Subwoofer menu is shown when the SELECT button is pressed in the setup menu with Subwoofer menu
as active submenu, or when the BACK button is pressed in main source menu, main trim menu, HF shelf,
LF shelf, LF Rollof, LF RollFr or Subwoofer settings menus. The subwoofer alias appears. Which Subwoofer
submenu option appears depends on the last shown subwoofer submenu option. The last shown subwoofer
submenu option appears. (In this example Main Source).
S
u
b
w
o
o
f
e
r
M
a
i
n
S
o
u
r
c
e
Submenus:
Main Source, Main Trim, Sub LF Rollslope, Sub LF RollFr, +10dB Gain, Phase
Reverse, Phase, Parametric EQ, PEQ Gain, PEQ Freq, PEQ Q, LR
Out Response, LR Out Level.
Actions
:
Rotary
: UP/DOWN: scroll up/down in the sub-menu list
Buttons
: MENU: nothing.
BACK: the Setup menu appears (see 3.1).
PRESET: If pressed briefly the current preset is displayed for two seconds.
If held for more than two seconds the preset menu appears (see 4).
SELECT: depends on submenu:
Main Source
: enter Main Source menu (see 3.1.5.1).
Main Trim
: enter Main Trim menu (see 3.1.5.2).
Sub LF Rollslope: enter Sub LF Rollslope menu (see 3.1.5.3)
Sub LF RollFr: enter Sub LF RollFr menu (see 3.1.5.4)
+10dB Gain: enter +10dB Gain menu (see 3.1.5.5)
Phase Reverse: enter Phase Reverse menu (see 3.1.5.6)
Phase: enter Phase menu (see 3.1.5.7)
Parametric EQ: enter Parametric EQ menu (see 3.1.5.8)
PEQ Gain: enter PEQ Gain menu (see 3.1.5.9)
PEQ Freq: enter PEQ Freq menu (see 3.1.5.10)
PEQ Q: enter PEQ Q menu (see 3.1.5.11)
LR Out Response: enter LR Out Level menu (See 3.1.5.12)
LR Out Level: enter LR Out Level menu (See 3.1.5.13)
MUTE: a mute/un-mute command is sent to all channels. The display
backlight flashes twice per second when muted.
Summary of Contents for TWOTWO
Page 1: ...User Guide remote control Serial No Hand built by ...
Page 2: ......