background image

 

Submenus: 

Off, 6dB/Oct, 12dB/Oct, 18dB/Oct

 

Actions

:

  

Rotary

:   UP/DOWN: scroll up/down in the sub-menu list

  

Buttons

:  MENU: nothing.

 

 

 

BACK: the Setup menu appears (see 3.1.5).

 

 

 

PRESET: If pressed briefly the current preset is displayed for two seconds. 

 

 

 

If held for more than two seconds the preset menu appears (see 4).

 

 

 

SELECT: saves setting and sends to selected channel. The Subwoofer menu   

   appears 

(see 

3.1.5) 

 

 

 

MUTE: a mute/un-mute command is sent to all channels. The display  

 

 

 

 

backlight flashes twice per second when muted.  

3.1.5.4 Sub LF RollFr Menu

The Sub LF RollFr menu is shown when the SELECT button is pressed in the Subwoofer menu with Sub LF RollFr 
as active submenu. Which Sub LF RollFr submenu option appears depends on the current Sub LF RollFr. 
 

S

u

b

L

F

R

o

l

l

F

r

e

q

2

0

0

H

z

 

Submenus: 

50Hz, 80Hz, 120Hz, 150Hz, 200Hz 

 

Actions

:

  

Rotary

:   UP/DOWN: scroll up/down in the sub-menu list

  

Buttons

:  MENU: nothing.

 

 

 

BACK: the Setup menu appears (see 3.1.5).

 

 

 

PRESET: If pressed briefly the current preset is displayed for two seconds. 

 

 

 

If held for more than two seconds the preset menu appears (see 4).

 

 

 

SELECT: saves setting and sends to selected channel. The Subwoofer menu   

   appears 

(see 

3.1.5) 

 

 

 

MUTE: a mute/un-mute command is sent to all channels. The display  

 

 

 

 

backlight flashes twice per second when muted. 

3.1.5.5 +10dB Gain Menu

The +10dB Gain menu is shown when the SELECT button is pressed in the Subwoofer menu with +10dB Gain 
as active submenu. The current value appears. (In this example: On) 
 

+

1

0

d

B

G

a

i

n

O

n

 

Submenus: 

On, Off 

 

Actions

:

  

Rotary

:   UP/DOWN: scroll up/down in the sub-menu list

  

Buttons

:  MENU: nothing.

 

 

 

BACK: the Setup menu appears (see 3.1.5).

 

 

 

PRESET: If pressed briefly the current preset is displayed for two seconds. 

 

 

 

If held for more than two seconds the preset menu appears (see 4).

 

 

 

SELECT: saves setting and sends to selected channel. The Subwoofer menu   

   appears 

(see 

3.1.5) 

 

 

 

MUTE: a mute/un-mute command is sent to all channels. The display  

 

 

 

 

backlight flashes twice per second when muted. 

Summary of Contents for TWOTWO









































Reviews: