3
Maintenance and General Notes
Basically the 3D Probe Positioner is maintanance-free. However if the device is exposed to pollution, regular
cleaning is necessary.
Remove dust and dirt from the joints.
For cleaning purposes use standard cleaning agents commercially available (don`t use any lyes or acids!).
Apply a little amount of lubricant to the screws and joints.
[D]
[E]
Handling
3D Probe-Positioners
The 3D Probe Positioner can be operated easily.
Hold the 3D Probe Positioner and loosen the central tensioning knob
[D]
until the 3D Probe Positioner can be
moved. Bring the 3D Probe Positioner into the desired position and fix the device by turning the central
tensioning knob
[D]
contrary. With the spring tip of PMK probes you can set precisely the contact to the
measuring point.
Attention:
Do not release the tensioning knob
[D]
completely, since otherwise the 3D Probe Positioner
collapses in itself and could damage your measuring setup!